I wrote these a while ago with some intention of creating flight training tools. I'm making them available to all the other programmer / pilots out there who might find them useful. https://codesandbox.io/s/six-pack-flight-instruments-fl7b8
This is really nice - you know what it inspires me to do: make a synthesiser interface with the same tech/look and feel. Do you have a repo link where I might contribute something in that regard?
Wired up to MIDI, this could be the basis of a very nice set of synth visualisation tools ..
Unfair and needlessly condescending criticism. He implemented them for training materials. The knee-jerk assumption of stupidity around here is getting really old.
d3 would be the obvious choice to me. I have only taken a cursory look at your code but strikes me that it could be fairly straight forward to rewrite it using d3.
d3 is just a low-level combination of HTML, CSS, JS and SVG. It's seldom obvious how anything is easy to do "using d3," unless manipulating a table of data.
Essentially, if you're a raw d3 programmer, you're a front-end web engineer.
* your plane crashes because the avionics computer OOM’s because you’re running chrome
* your plane crashes because JS decides that the pitch angle is suddenly NaN and plows the plane into the ground.
* your plane won’t take off, because there’s been yet another NPM dependency breakage because someone got annoyed and removed their single line “right pad” package, which causes the avionics to break because some dependency 400 layers down the tree used it to align an ad that displays on the command line at startup
* the plane crashes because in an emergency the pilots couldn’t find the instrumentation they were looking for, because the UI was updated for the 15th time that month and that disk has been removed “because A/B testing showed nobody clicked on it”.
Marking this to reference it in a couple of years or decades, when it probably has become a laughable understatement instead of a sarcastic exaggeration.
Possible issue with the Altimeter. I'm not sure if this was meant as an accurate simulation, or just a technical demonstration of what is possible with the component, but I've noticed that the Altimeter pressure setting (small window) is changing on its own as the altitude hand sweeps around.
That never happens, the altimeter setting is a fixed setting set by the pilot used to calibrate the altimeter readout to be relative to a known/shared pressure setting.
Looks like the site is demoing the altimeter reading changing as the setting is changed. Note the altitude is changing properly with respect to altimeter setting.
Correct! If you play with the source on codesandbox you can disable the demo mode and actually rotate the Kollsman window using the BARO button. The calculations for pressure and resulting altitude are from standard physics texts.
It's commercial software, but there's free demo versions of the controls, and a personal license is 600 euros, which is a good deal if it does what you want.
37 comments
[ 2.8 ms ] story [ 84.1 ms ] threadWired up to MIDI, this could be the basis of a very nice set of synth visualisation tools ..
Essentially, if you're a raw d3 programmer, you're a front-end web engineer.
* your plane crashes because the avionics computer OOM’s because you’re running chrome
* your plane crashes because JS decides that the pitch angle is suddenly NaN and plows the plane into the ground.
* your plane won’t take off, because there’s been yet another NPM dependency breakage because someone got annoyed and removed their single line “right pad” package, which causes the avionics to break because some dependency 400 layers down the tree used it to align an ad that displays on the command line at startup
* the plane crashes because in an emergency the pilots couldn’t find the instrumentation they were looking for, because the UI was updated for the 15th time that month and that disk has been removed “because A/B testing showed nobody clicked on it”.
https://www.theregister.co.uk/2020/03/26/corejs_maintainer_j...
Associated HN thread:
https://news.ycombinator.com/item?id=22681860
Looks really fantastic!
Possible issue with the Altimeter. I'm not sure if this was meant as an accurate simulation, or just a technical demonstration of what is possible with the component, but I've noticed that the Altimeter pressure setting (small window) is changing on its own as the altitude hand sweeps around.
That never happens, the altimeter setting is a fixed setting set by the pilot used to calibrate the altimeter readout to be relative to a known/shared pressure setting.
https://www.projectmagenta.com/
It's commercial software, but there's free demo versions of the controls, and a personal license is 600 euros, which is a good deal if it does what you want.