I got one of these as a kid and used the crap out of it!
I was that kid who wanted toys that did actual stuff. This toy was one of those. Kept it for years to fix that odd plastic problem. When I ran out of the little rods, I remember trying every polymer I could find, until I found some little sticks that worked in a similar way.
Not really a "SpaceX" thing - it's been used on the Space Shuttle and many spacecraft since then. Also boats, cars, planes, etc. Heck, iMacs have used it since 2012.
You are entirely right of course, I didn't mean that it was a SpaceX-exclusive process or anything. It's just where I heard about it first and I would bet it is the most high-profile application currently in use. :)
I was a 90's kid and got whatever the 90's version of this was called. It had a long "welding stick" that I'd wear down past nub to get the max out of.
To this day, the melting plastic smell gives me nostalgia vibes... Probably not the healthiest in hindsight.
Kinda wish I could load the page to see what this is, but apparently there's enough dodgy trackers on there that the page completely fails if you have them blocked.
I never had the Spinwelder but remember seeing it in the back of the Sears catalog. One of my favorite toys as a 70's kid, the Vertibird toy helicopter:
Like any good helicopter toy I was unable to fly it when I first woke up on Christmas and shoved the batteries in. You actually had to control the lift (not a collective but speed control on the rotor) and the pitch. Too much pitch and you lose lift so had to compensate with extra lift.
By the New Years I was flying like a pro, swinging around and pulling back on the pitch to reverse thrust and stop over a dime....
My favorite "make stuff toys" of the 70's were my Erector set and Lego set of course.
But then I also had this trippy Buckminster-Fuller-meets-Light-Bright building toy called an Astrolite:
> My favorite "make stuff toys" of the 70's were my Erector set and Lego set
The Legos I had in the 70s did not have any mini figures (did they exist in the US at that time? None of my friends had any either) and there parts were only a few standard sizes as I recall (no small ones like today). I don’t even remember “kits” so much as “here’s a bunch of Legos, go build something” like another version of blocks of Lincoln Logs.
Did you actually have kits with build instructions that came with the kit?
I believe I saw small Legos kits as a kid in the 70s, but I certainly didn't have any of that. As you say, we had just a bucket of legos bricks.
What I really liked to do with them is to make all kinds of all-terrain trucks with lots of wheels and stuff. This was all just from imagination, and they I came up with fresh designs every time.
I really don't understand what people do these days, with kits that are supposed to be assembled just so. I mean, I get that people like to build scale models, but why not just do that? With lego, it's not going to look like the real thing anyway, so why not use it for your own expression?
I had a Vertibird - thanks for reminding me about it!
There's something about toys like that at a formative period in your development that means that small details seem to stick in your memory. I can even now remember the feel or the rotating spring that took the horizontal rotation of the shaft through 90 degrees to meet to the propeller blades, and which wobbled to a blur when the machine was running.
I seem to remember it didn't hurt much when you got hit by it, and you could trip over it repeatedly without breaking it, so it was very well designed for a typical 8 year old.
I didn't have the erector set, but plenty of lego. The technics stuff had come out and I built all sorts of stuff with it. I remember getting this http://technicopedia.com/853.html which was released in 1977 for christmas.
> My favorite "make stuff toys" of the 70's were my Erector set and Lego set of course.
I can't resist telling this story: As a little kid, I could not figure out why my erector set was so superior to all of my friends' kits. I finally asked my parents about it: My grandfather worked for AC Gilbert as a tool and die maker, and he made a lot of the original tooling for the erector set. (We had the original big red metal box filled with pieces (from the 30s?), and another cardboard box with the overflow.)
You can buy actual welding equipment and a angle grinder on eBay. There are YouTube videos to learn the basics.
The caveat is that you need a lot of protection to not harm/kill yourself:
- Eye-Protection so the welder doesn't burn out your eyes
- Long clothes so you don't get irradiated/sunburn from the welder
- Welding gloves so sparks don't burn into your skin
- Protective Glasses in case the disc of the angle grinder explodes
- Ear protection because the angle grinder is loud enough to permanently damage your ears
Aside from that, its an awesome toy and allows you to fix quite some things. And other people automatically assume you are doing serious work, even when you are just fucking around.
Its not suitable for kids in case you were looking for that.
Also the humble rotary (Dremel style) tool. I was doing some work with mine yesterday and - in a moment of complacency - actually had the tool bit make contact with the surface I was working on for a second or two before I realized "shit, I'm not wearing safety glasses." I shut it down and grabbed my safety glasses pronto. I'm not exactly a "safety nazi" on this stuff, but some things just make too much sense to not do. And even a rotary tool can send shards slamming into your eyes or something that could cost you your vision. :-(
It's always worth 15 seconds of time to find and put on the safety glasses for a lifetime of having both working eyes. I'd ruminate over "if I had just found my safety glasses" for the rest of my life if something flew off what I was working on and destroyed one of my eyes.
Same with ear protection. It's not worth being deaf (or even partially deaf) to get a job done 15 seconds faster.
A buddy has a wood shop and one time after a router spun down, one of the bits had gone missing. Undoubtedly lodged in a wood roofing element somewhere, but at least it did not go thru anyone.
Absolutely! I snapped a router bit off by being a bit too aggressive in the engineering shop at university. I'm still thankful it didn't injure any of the several other people in the room; it could have been very damaging coming off at a different angle.
What heat source do you use for your brazing? The only brazing I've ever done was with an oxy-acetylene torch, which isn't the most convenient thing in the world to work with. Mostly the part about needing an industrial welding supply place or something to rent bottles from.
MIG welding with a self-feeding wire welder can also be a little bit easier in the sense of not requiring combined dexterity between both hands simultaneously, which is something that doesn't come naturally to everybody. That said, if one can learn to solder, they can probably learn to braze.
Depends what you're brazing. You can do a lot with just a propane torch, or air-propane, with the right shaped pile of insulating firebrick to keep the heat in the workpiece. I've only ever propane brazed; I don't think many people do oxy acetylene at home any more.
I am not an expert, but I seem to remember welders have higher power requirements than other tools and home appliances, with a specialized socket (the voltages and plug shapes seem to vary from region to region - these ones tend to have 3 pins instead of the "usual" two). You might already have such an outlet if you have used other heavy duty tools in your garage, but most people don't.
Yeah, yeah. And so do the British. That is why I used quotes. Socket shapes and characteristics change with geography. You might still need a socket that looks different than the "usual wall sockets that you find at home" for powering a welder.
Brings back pleasant memories. I certainly loved the one I had as a child. I can still smell the _almost_ burning plastic that the device created in operation.
I grew up during the 70's and was an avid reader of the toy section of the Sear's catalog (until they stopped sending them for free) but somehow I never heard of this kind of toy.
There were some very weird toys in the 70s. I recall an actual injection molder (not the "Thingmaker", that was just heating thermoplastic) that could be used to make small soldiers that smelled vaguely of dog excrement. It had a hopper that you filled with pellets of some kind of polymer, and a plunger that injected melted polymer into a mold. I coveted this one. I haven't been able to find anything on this one, due to information camouflage: all I can google up is references to injection molded toys, and companies that do injection molding. The toy I'm remembering had you doing the injection molding yourself.
Looks cool, but I can't help thinking about how the plasticizers in stuff like that helped reduce male fertility to the 50% we see today compared to the 70's (yes, I know, we sit around all day too, and there are many more causes, just saying perhaps there is a reason this is not distributed like this anymore).
"when piece of information A has a name similar to another, very different, much more popular piece B. This makes searching for A difficult because you always get results for B instead."
(Wow, Yandex was what found the HN submission, not Bing or Google, in whose results it was ironically camouflaged by other consecutive uses of the two words)
Toys with similar functionality to the Strange Change exist today, only they're made from polymers that expand upon absorbing water. Some are packaged in literal capsules - the pharmaceutical kind.
Close, but the Strange Change machine had a vise. You'd reheat the monster until it was rubbery, then cram it into the vise and squeeze it back into a square lozenge. Let it cool, and it stayed a square. They only lasted maybe 5 cycles before they didn't keep the square shape.
I think that's what I remember based on the illustration of the kid working the injector. I vaguely recall that the soldiers could be made with a wire skeleton, making them posable. Smelled moderately bad.
I'd love to know what that injection molding toy was if you ever figure it out. There's still a Crayola crayon maker toy which forms molds from heated crayon wax. Not as intense as actual injection molding though
Cyanoacrylate works on PLA, but PLA is notably not amenable to solvent welding or smoothing with household supplies compared to the ease with which ABS/ASA (acetone) or PVB (isopropyl alcohol) pieces can be fused together.
It is marginally possible to fuse pieces of PLA together using ethyl acetate (sold to consumers as "acetone-free nail polish remover" or "MEK substitute"), but this is not nearly as accessible, effective, or reliable compared to other plastics.
I've always had pretty mixed luck with cyanoacrylate. It kinda works, but it's never very strong on PLA. Doesn't hold up nearly as well as a welded connection.
My No. 6-1/2 Gilbert Erector set. Got it for Hanukkah about 62 years ago. The smallest set that still had the full electric engine, a plug-in motor with a gearbox fully assembled to it.
For grown ups, get yourself a 110V MIG welder and just start sticking metal together. It is a surprisingly fun and accessible hobby with tremendous practical applications.
It can be a huge pain if you don't have a source of known alloy pieces, though. When you don't know what material you have finding the middle ground between something that's barely held together and blowing holes in it can be surprisingly difficult as an amateur.
Any big box hardware store has a handful of steel sheet and L-sections, and a store called "Metal Supermarkets" is pretty common throughout North America which will stock anything a hobbyist welder could dream of, order whatever they don't have, cut to length, etc. There's cheaper, better sources but they are not always accessible to a walk-in shopper with a hand sketch.
For practice, most welding suppliers/metal shops have a bin full of mild steel scraps and cut-offs that they may even let you have for free. (The one I went to even gave me a box for them.)
If you happen to have a high-school or community college nearby with a welding program, it would probably be productive to ask one of the instructors there where they source their practice material. When I was in high-school I think most of ours came from Horton Iron & Metal[1], the local scrap metal recycling firm. Probably many areas have something similar?
Well… yeah, do your research, it has non-trivial dangers to it. :) Definitely start with mild steel and or aluminum. Stainless steel is something you would graduate to with correct PPE (fume extractors, adequate respirators, etc.)
It's much safer for everyone if you lead with metaphorical truth, let them find the details later. Humans are horrible at estimating danger. It's much better to be precautious.
All guns are loaded --- metaphorically true (I.E. you live longer if you act like it's always true)
Since we're talking about cool toys from back in the day, let me ask if anybody can help me with something. I had a cool toy back in the late 70's, early 80's, and I'd occasionally like to mention it or refer to it (or maybe even indulge nostalgia and try to find one on ebay to buy) but I can't remember what it was called.
Does anybody remember something like this: a wheeled toy that I vaguely recall had stylings something like a tank or an APC or something - or maybe one of those weird vehicles from Damnation Alley[1] - but with a bunch of buttons on top with numbers and directional arrows. You could "program" the thing to roam around on its own by pushing a sequence of directional arrows and numbers. It was something like "Go forward 5 units, turn left, go 4 units", etc. I don't even know now what distance units it used, or if the speed was programmable. Once you programmed it there was a "Go" button that would send it off on its little adventure crawling around the living room (and promptly getting stuck under the TV stand or something, but that's neither here nor there).
oh boy, relevant patents are expired, there's a hacker community and everything.
It would be fun to build a modern version of this, with an Arduino or Rpi or something providing the "brains", and with some input sensors (ultrasonic distance sensor, camera, etc). But instead of just having the input buttons on top, you could also program it over the network (or USB) using a real programming language.
I guess that wouldn't be much different though, than some of the other low-end experimental robotics platforms that are out there?
Today there are the Programming Journey Robots from Terrapin. My spouse uses the simplest, the Bee-Bot, in her kindergarten classroom. She wrote a grant to get about 15 of them. They use Terrapin's Logo and are much loved by her students.
J Bull Electrical in England used to sell "Big Trak Gearboxes", the little plastic gearboxes with two motors, for a few pounds for *years*. For all I know they still do. Their website is as full of bizarre stuff as their magazine ads used to be - from random bags of components to Sinclair C5 motors to the aforementioned gearboxes to Chinese Army air rifles which were so powerful you needed a firearms cert for them even back in the comparatively lax 1980s!
I'm glad to see they're still on the go. Their adverts in Wireless World and Television were a great source of wonder for my geeky friends and I when I was at school some 30-odd years ago, and finding they're still as batshit as ever has cheered me up no end.
Now I wonder if Display Electronics ever shifted those 9" bare chassis Microvitec colour monitors from National Air Traffic Control, or indeed their deactivated heat-seeking missiles?
If so, they remind me a bit of outfits like American Science & Surplus, or Electronics Goldmine. Real eclectic collection of bizarre and weird stuff. :-)
That's the one. Mad, isn't it? They used to take out full-page ads with their surplus electronics and air rifles and bike tyres and ghods alone know what else.
I got one of these a few months back at a vintage store for $15. The owner couldn't pay me to take it off his hands — he reduced the price from $20 as soon as I expressed interest.
It works wonderfully! Once I rounded up a ton of D-cell batteries...
It has the pull-behind trailer, which is a genius design. The hitch pin is also a TRS plug which transfers the signal from the tank to dump the trailer. It also allows the tank to do a complete 360 while towing, since the hitch reaches out and over, then down, to the center of the tank.
The whole thing is just a brilliant piece of engineering and represents, as far as I can tell, the first fairly affordable "AI" home toy.
Not just the sigfigs, the juxtaposition of the word "about" with the excessive sigfigs. Combining a word indicating imprecision with excessive sigfigs is a very common American idiom to convey exaggeration. (Probably other places too, but I don't have firsthand experience with them.)
The toy I got the most out of was a giant set of tinker toys. The were solid enough to be the structure for blanket forts. They were hollow, so we would use them in our sandbox as pipes between the water features.
My brother won some kind of contest from Mattel in the 70's and got a GIANT 8' stocking full of Mattel products. It contained the Spinwelder, which was incredible.
It also included the Vertibird helicopter (mentioned in another thread), Big Jim Ski Jump and also the Big Jim sky commander play set, SSP smash up derby, a couple of barbie things that went to my sister and a bunch of other stuff I forget.
It was the most awesome Christmas imaginable for an 8 year old and a 10 year old.
I just checked with the datasheet of a current commercial spin welder.[0] The rpm's given on the datasheet are 500 to 2500. I think the author might have slightly exaggerated the capabilities of their 1970s toy for effect.
Based on the size and shape of the tool I'm guessing it's a brushed DC motor, which in that size can easily achieve several kRPM --- unloaded, that is. When it's actually being used to do the work of melting the plastic, probably below 1kRPM.
I also had one of these. I think I completed one of the designs included in the kit, but it broke apart relatively quickly. As alluded to in the article, it was relatively easy to make a surface weld that didn't penetrate far into those little black plastic I-beams from the kit. From what I recall, the "welding rods" in the kit were the same ABS plastic that the I-beams were. I've got to wonder if a slightly harder plastic (or with a higher melting point) for the rods themselves would have worked better.
Years later, I built another dragster from the Lego Technic 853 Car Chassis and the steering from the 854 Go-Kart.
142 comments
[ 3.8 ms ] story [ 239 ms ] threadhttps://toytales.ca/spinwelder-from-mattel-1974/
https://3dprint.com/16023/friction-filling-3d-prints/amp/
I was that kid who wanted toys that did actual stuff. This toy was one of those. Kept it for years to fix that odd plastic problem. When I ran out of the little rods, I remember trying every polymer I could find, until I found some little sticks that worked in a similar way.
https://www.youtube.com/watch?v=YUyLHQxRHKo
To this day, the melting plastic smell gives me nostalgia vibes... Probably not the healthiest in hindsight.
http://www.timepassagesnostalgia.com/&searchkeywords=vertibi...
Like any good helicopter toy I was unable to fly it when I first woke up on Christmas and shoved the batteries in. You actually had to control the lift (not a collective but speed control on the rotor) and the pitch. Too much pitch and you lose lift so had to compensate with extra lift.
By the New Years I was flying like a pro, swinging around and pulling back on the pitch to reverse thrust and stop over a dime....
My favorite "make stuff toys" of the 70's were my Erector set and Lego set of course.
But then I also had this trippy Buckminster-Fuller-meets-Light-Bright building toy called an Astrolite:
https://blog.adafruit.com/2019/01/16/vintage-toy-fun-astroli...
The Legos I had in the 70s did not have any mini figures (did they exist in the US at that time? None of my friends had any either) and there parts were only a few standard sizes as I recall (no small ones like today). I don’t even remember “kits” so much as “here’s a bunch of Legos, go build something” like another version of blocks of Lincoln Logs.
Did you actually have kits with build instructions that came with the kit?
https://en.wikipedia.org/wiki/Girder_and_Panel_building_sets
What I really liked to do with them is to make all kinds of all-terrain trucks with lots of wheels and stuff. This was all just from imagination, and they I came up with fresh designs every time.
I really don't understand what people do these days, with kits that are supposed to be assembled just so. I mean, I get that people like to build scale models, but why not just do that? With lego, it's not going to look like the real thing anyway, so why not use it for your own expression?
There's something about toys like that at a formative period in your development that means that small details seem to stick in your memory. I can even now remember the feel or the rotating spring that took the horizontal rotation of the shaft through 90 degrees to meet to the propeller blades, and which wobbled to a blur when the machine was running.
I seem to remember it didn't hurt much when you got hit by it, and you could trip over it repeatedly without breaking it, so it was very well designed for a typical 8 year old.
I didn't have the erector set, but plenty of lego. The technics stuff had come out and I built all sorts of stuff with it. I remember getting this http://technicopedia.com/853.html which was released in 1977 for christmas.
I can't resist telling this story: As a little kid, I could not figure out why my erector set was so superior to all of my friends' kits. I finally asked my parents about it: My grandfather worked for AC Gilbert as a tool and die maker, and he made a lot of the original tooling for the erector set. (We had the original big red metal box filled with pieces (from the 30s?), and another cardboard box with the overflow.)
We also had a killer American Flyer train set (also an AC Gilbert product), and the Lead Castor kit: Molten lead for kids! Hard to imagine in the current age. https://picclick.com/Vintage-Ac-Gilbert-Kaster-Kit-Furnace-T...
Fortunately, we did not have the Gilbert Atomic Energy Kit. I probably lost enough brain cells on the lead.
I assumed this was a joke but I googled it in the off-chance that it wasn't, and I'm glad I did. https://en.wikipedia.org/wiki/Gilbert_U-238_Atomic_Energy_La...
I remembered the JC Penny's and Toys R Us catalogs but forgot about the sears toys sections!
The caveat is that you need a lot of protection to not harm/kill yourself:
- Eye-Protection so the welder doesn't burn out your eyes
- Long clothes so you don't get irradiated/sunburn from the welder
- Welding gloves so sparks don't burn into your skin
- Protective Glasses in case the disc of the angle grinder explodes
- Ear protection because the angle grinder is loud enough to permanently damage your ears
Aside from that, its an awesome toy and allows you to fix quite some things. And other people automatically assume you are doing serious work, even when you are just fucking around.
Its not suitable for kids in case you were looking for that.
I had an angle grinder disc shatter on me and one piece took a huge gouge out of a wooden toolbox I had built. I am afraid of angle grinders now.
Basically anything that spins at a high RPM is one loose t-shirt away from strangling you and embedding itself into your fleshy bits.
Same with ear protection. It's not worth being deaf (or even partially deaf) to get a job done 15 seconds faster.
Brazing is more flexible, requires less expensive, less complex gear and considerably less training.
MIG welding with a self-feeding wire welder can also be a little bit easier in the sense of not requiring combined dexterity between both hands simultaneously, which is something that doesn't come naturally to everybody. That said, if one can learn to solder, they can probably learn to braze.
https://youtu.be/-aEuAK8bsQg
There was also the Mattel Strange Change: https://flashbak.com/youll-burn-your-fingers-remembering-mat...
Just like the "Thingmaker", everyone burned themselves on this one.
It was centipedes and the like made out of a rubbery material that you melted into moulds.
Ooh, a term for a relatable problem, apparently coined yesterday by this blog post, https://news.ycombinator.com/item?id=32241020
"when piece of information A has a name similar to another, very different, much more popular piece B. This makes searching for A difficult because you always get results for B instead."
(Wow, Yandex was what found the HN submission, not Bing or Google, in whose results it was ironically camouflaged by other consecutive uses of the two words)
https://www.google.com/search?kgmid=/m/05p85hp
The Kenner Electric Mold Master sounds like what you remember.
https://www.amazon.com/Crayola-03-9000-Crayon-Maker/dp/B0029...
It is marginally possible to fuse pieces of PLA together using ethyl acetate (sold to consumers as "acetone-free nail polish remover" or "MEK substitute"), but this is not nearly as accessible, effective, or reliable compared to other plastics.
If you happen to have a high-school or community college nearby with a welding program, it would probably be productive to ask one of the instructors there where they source their practice material. When I was in high-school I think most of ours came from Horton Iron & Metal[1], the local scrap metal recycling firm. Probably many areas have something similar?
[1]: https://www.hortoniron.com/
All guns are loaded --- metaphorically true (I.E. you live longer if you act like it's always true)
Does anybody remember something like this: a wheeled toy that I vaguely recall had stylings something like a tank or an APC or something - or maybe one of those weird vehicles from Damnation Alley[1] - but with a bunch of buttons on top with numbers and directional arrows. You could "program" the thing to roam around on its own by pushing a sequence of directional arrows and numbers. It was something like "Go forward 5 units, turn left, go 4 units", etc. I don't even know now what distance units it used, or if the speed was programmable. Once you programmed it there was a "Go" button that would send it off on its little adventure crawling around the living room (and promptly getting stuck under the TV stand or something, but that's neither here nor there).
[1]: https://en.wikipedia.org/wiki/Damnation_Alley_(film)
edit: oh boy, relevant patents are expired, there's a hacker community and everything. This looks like a delightful rabbit hole.
oh boy, relevant patents are expired, there's a hacker community and everything.
It would be fun to build a modern version of this, with an Arduino or Rpi or something providing the "brains", and with some input sensors (ultrasonic distance sensor, camera, etc). But instead of just having the input buttons on top, you could also program it over the network (or USB) using a real programming language.
I guess that wouldn't be much different though, than some of the other low-end experimental robotics platforms that are out there?
https://www.terrapinlogo.com/products/robots.html
I'm glad to see they're still on the go. Their adverts in Wireless World and Television were a great source of wonder for my geeky friends and I when I was at school some 30-odd years ago, and finding they're still as batshit as ever has cheered me up no end.
Now I wonder if Display Electronics ever shifted those 9" bare chassis Microvitec colour monitors from National Air Traffic Control, or indeed their deactivated heat-seeking missiles?
https://www.bullybeef.co.uk/
If so, they remind me a bit of outfits like American Science & Surplus, or Electronics Goldmine. Real eclectic collection of bizarre and weird stuff. :-)
Edit: Also "NUCLEAR", "PUB GAMES", "RADIOSONDE", and of course "FART BOMBS".
Curse you GP, for another rabbit hole.
Edit edit: Oh and "TRUTH".
Edit3: One more and I'll stop: "water resistant alarm chrono digital watches with built in refillable gas lighter!"
[1] https://en.m.wikipedia.org/wiki/Big_Trak
This? https://en.wikipedia.org/wiki/Big_Trak
I think there was a knock-off one that was vaguely similar.
It works wonderfully! Once I rounded up a ton of D-cell batteries...
It has the pull-behind trailer, which is a genius design. The hitch pin is also a TRS plug which transfers the signal from the tank to dump the trailer. It also allows the tank to do a complete 360 while towing, since the hitch reaches out and over, then down, to the center of the tank.
The whole thing is just a brilliant piece of engineering and represents, as far as I can tell, the first fairly affordable "AI" home toy.
Pic of it on my shelf: https://imgur.com/a/5JLoXoJ
Datasheet: https://www.sonics.com/site/assets/files/2949/spin-welder.pd...
((1 mm)^2) * 1 gram * (((183 339 * 2 * pi) / second)^2) = 1 326.99551 joules
It would have 1300J of rotational energy if there was only 1 gram of spinning mass at 1 mm distance.
It also included the Vertibird helicopter (mentioned in another thread), Big Jim Ski Jump and also the Big Jim sky commander play set, SSP smash up derby, a couple of barbie things that went to my sister and a bunch of other stuff I forget.
It was the most awesome Christmas imaginable for an 8 year old and a 10 year old.
I just checked with the datasheet of a current commercial spin welder.[0] The rpm's given on the datasheet are 500 to 2500. I think the author might have slightly exaggerated the capabilities of their 1970s toy for effect.
[0] https://www.sonics.com/site/assets/files/2949/spin-welder.pd...
I doubt the motor was capable of 1000rpm and it certainly wouldn't be necessary.
In other words, I agree with your kazillion interpretation…
Years later, I built another dragster from the Lego Technic 853 Car Chassis and the steering from the 854 Go-Kart.