I don't understand the problem that thread solves that zigbee doesn't! The article says that thread doesn't require a hub but it require a border gateway that is almost indistinguishable from a hub. And as far as my home assistant setup is concerned, it doesn't require a hub, only a zigbee radio.
The only thing that seems to advantage thread is manufacturers support, but I don't see what's stopped them to regroup around zigbee.
Any one has clues on why Thread was needed when zigbee already existed?
Thread can talk to your phone using a gateway. Thread is IPv6 based. The gateway, called border router, is no different than access point in function.
Current systems require a hub, talk protocol to hub, hub talks Zigbee to device. Home Assistant is great, but you still need device running it. Thread requires border router, but that is simpler device and only does networking.
Matter is the other part of Zigbee, the home automation profile. I get the impression it is bloated with multiple companies involved, but it is standard. Matter means that your phone can talk to Wifi device with your choice of apps.
I am hoping that this is the thing that triggers Matter/Thread to go mainstream.
I'm currently blocked because Google and Amazon don't support "Generic Switches". Which means that if I switch over a light-bulb to being a smart one I can't use something like the Arre Smart Button to control them. Which seems like such a standard requirement that I do not understand why it's not supported.
If Ikea will let me set that up then I'll be delighted.
I'm not sure what I am missing, but isn't it completely possible to connect any kind of smart button to control a light bulb? Isn't this exactly what home assistant is being used for? I only tried it, but was able to add a generic smart button to HA and let it control a USB switch with some led lights. How is your use case different?
UPDATE: Ok, is this about the state of Matter implementation? I think I misunderstood that.
My first reaction here was horror: Home Assistant and Zigbee integrate perfectly with IKEA’s devices, and the devices are beautifully designed! Please don’t take these away! Only the other day did I marvel at how a low battery indicator flashes on one of my remotes when I use it. A design flourish that I really appreciated.
But I read that Thread supports IPv6 via mesh networking. It did always feel a bit awkward having Zigbee networking and IP networking competing over the same site. It would be very nice to issue commands from any peer to any other peer, using standard networking. Can anyone here confirm that Matter/Thread will be a bright, open, and happy new future?
A lot of people I know would scoff at “smart home” stuff. I used to. Having a programmable house is incredibly useful though. When all your lights and sensors are available for programming you can do stuff that’s cool not because it is particularly innovative but because it is incredibly easy to implement:
- my partner can control a “do not enter, call in progress” red light bulb;
- my outside lights trigger off PIR, door sensors, or Ring motion detection;
- I have a series of indoor lamps come on in succession if motion is detected outside at night;
- we programmed a push button to turn a light green on one tap and red on a double tap for a fun game of twenty questions;
- and my indoor Ring cameras shut down unless both my partner and I are out of the house.
All of these things were trivial to do given that everything is available on one Home Assistant instance!
Huh... anyone know what this will mean for people with legacy Ikea lightbulbs and hub?
e.g. if I add future Ikea lightbulbs or other equipment, will this mean managing them via a different system?
(By the by, I've been very happy with Ikea bulbs so far; while other people complain of LED bulbs with a short lifespan, [touches wood] I've not had a single failure with Ikea smart bulbs, with ~7 years and counting on one of mine.)
This sucks. Matter is a closed ecosystem, enforced using a public key infrastructure (PKI) and device attestation certificates. Thread seems to require paying royalties if you want to ship devices. It’s disappointing that IKEA claims that this move is towards a more open ecosystem.
On top of that, the switch breaks compatibility with existing hardware (except for the Touchlink functionality). If you have a bunch of Zigbee devices, but at some point want to add some of the new ones, you need to start thinking about replacing all the perfectly working Zigbee devices or have a fragmented network.
Just like Apple HomeKit you can add devices that aren't certified. It shows a warning, but apart from that it functions like a normal device (for as far as I can tell).
This isn't entirely true, isn't it? I mean, the whole internet runs on a PKI and we need such a mechanism to ensure secure communication across devices in the network.
I understand home devices that contain all sort of sensors and actuators should be handled in a similar fashion, isn't it?
I mean, that PKI doesn't exclude non-approved manufacturers from producing Matter devices, you can always trust their PAA (their CA) in your border router if it's not a well-known manufacturer. And also, I am pretty sure that if this is the case the Matter border router should warn you of this and ignore the fact that the PAA is not in the local store of root CAs (as we did in the times when we had https without Let's Encrypt and didn't want to pay Comodo to sign our certs)
I only recently discovered and invested in the IKEA ZigBee hardware, about the only product their MBAs havent destroyed. The hardware is very well built, and sensibly priced. What I liked most of all was that the hub was optional, and thus no cloud account required.
I ended up pairing mine with a 'ConBee II' and with a bit of Go code was able to receive sensor data with very little latency, and activate switches and lights very quickly.
What a shame they discontinue such a great product line. But I already decided this is the last home automation technology I'll invest in. ZigBee seems perfectly suited for this role, and no idea why we need yet another new standard. Although I also said that switching away from x10, if anyone still remembers that.
My IKEA was missing a lot of Trådfri assortment when I visited this week. I started to have doubts if they had abandoned the home automation niche. Now when I am searching their site, much is gone. But I guess they are clearing the inventory for a Threads relaunch
I’d not read much into that. My local IKEAs have stock issues since 2020. There is always a couple of products that are completely gone.
They are also pretty good at labeling the products in their website, you can search by “last chance to buy” (or local language equivalent) to see the list.
This is horrible news. Zigbee has been trouble-free and Thread has been nothing but Trouble to the point I had to throw out everything based on Thread…
This really sucks. I have a smart home with home assistant and most of my things are Zigbee and Ikea stuff are great. They are affordable and they are high quality. So now I have to find another provider of especially light bulbs.
"A software development kit (SDK) is provided royalty-free,[13][14] though the ability to commission a finished product into a Matter network in the field mandates certification and membership fees,[15][16] entailing both one-time, recurring, and per-product costs.[17] This is enforced using a public key infrastructure (PKI) and so-called device attestation certificates.[15]"
So it's a closed ecosystem that makes money for a cabal of corporations
No it wasn’t. My impression is it’s nice looking, but poorly implemented. I have near 100 zigbee and z wave devices. IKEA stuff is the only ones that have given me problems. I have their square color light panels and had to write a HA automation to flick them every power cycle because they get stuck and nonresponsive.
Maybe I judge them poorly because they’re the cheapest devices I let myself buy? Idk. They look great though.
Unfortunately, the writing's on the wall for mainstream adoption of Zigbee. For me, Leviton not making any more Zigbee smart switches was the last straw and I've prioritized Z-wave devices where possible. I also get much better performance out of Z-wave. Sad to see though, as the Zigbee devices I do have are working just fine. I don't really get the point of Matter or Thread when Z-wave works so well.
I use some sort of cobbled together solution with Philips Vue lights, a couple of LIFX lights, halfway set up HomeKit, the Vue app, some Alexa integration, some sort of gateway that I believe connects Zigbee to my LAN...
.. but all I can remember from growing up is the X-10 POWERHOUSE
I've found Matter totally confusing. Given a device that supports Matter (e.g., a smart plug) and a set of devices I want to control that from (e.g., an Amazon Echo and an iPad) it is not clear to me what else I need.
Apparently I need a "controller", which is not necessarily the thing that I as a user would think of the controller--as a user I think of the controller as the device I issue command from. A Matter controller is apparently a hub for connecting the thing I'm using to issue commands to the IOT device I want to control.
And maybe I need a "Thread border router"?
As far as the controller goes, apparently at some point Apple added the ability for iPads to be Matter controllers, so you could use a Matter device with just an iPad (if the Matter device used WiFi...if it used Thread then you would need a separate Matter controller and I'd guess one of those Thread border routers).
I was able to briefly use a Matter smart plug with my iPad without having a separate hub, but it stopped working not too long after. I deleted the plug from the iPad and did a factory reset on the plug and tried setting up again, but now when the iPad searches for the device during setup it doesn't even see it.
Apple still has instructions on their site for setting up devices for direct use from iPad, but several sites on the net report that they actually dropped that support from iPad.
So lets say I go get an actual Matter hub. Do I need a separate hubs for using my Matter devices from my Apple devices and using my Matter devices from my Amazon devices? How about if I need a Thread border router--will I need one for Apple and one for Amazon? What if I add Home Assistant later--am I going to need a third hub?
All I'm really trying to do for now is use this one TP-Link Tapo smart plug that supports Matter from Apple Shortcuts without having to use the Tapo app. The Tapo app does integrate with Shortcuts but you have to be logged in to your TP-Link account on the app for it to work. Every so often you have to re-login, breaking your shortcuts until you do.
What I'm currently considering is installing Home Assistant somewhere, probably in a VM on my Mac for now but latter on a dedicated RPi if the experiments in a VM show that it will work, and setting it up to be my Matter controller for the smart plug. Shortcuts (or Siri) won't be able to directly use Matter to control the plug with that setup, but there is a Home Assistant app for iOS/iPadOS that can do so and that supports Shortcuts.
It will basically be like I'm doing now with the Tapo app but instead with the Home Assistant app and no need to be logged in to TP-Link (or to even have internet access).
PS: I wouldn't need any of this if Apple would just get around to implementing for iPadOS the same 80% charge limit option that they have had on iOS for ages. I'm using the smart plug and Shortcuts as a kludge while waiting for that. I charge through the smart plug and have a Shortcut automation to turn off the smart plug when the iPad's battery level rises above 80%.
Some Amazon devices (see a list here: https://www.amazon.com/b?ie=UTF8&node=37490568011 ) already support Matter devices, so you might already have everything that you need. The Tapo 110M (M for Matter) plug for example can easily be paired with them and work flawlessly (an also much faster than the non-Matter counterparts). And yes, they don't need internet access to work.
You still need the TP-Link app for some more advanced functions like power metering though.
Matter has been very disappointing so far, with very unreliable connectivity and behavior (using Apple TV as a border gateway). I basically gave up on it and prefer to use non-Matter HomeKit hardware (usually WiFi) where I can. Don't know if Zigbee was better, but it can hardly be worse.
47 comments
[ 3.2 ms ] story [ 67.4 ms ] threadThe only thing that seems to advantage thread is manufacturers support, but I don't see what's stopped them to regroup around zigbee.
Any one has clues on why Thread was needed when zigbee already existed?
Current systems require a hub, talk protocol to hub, hub talks Zigbee to device. Home Assistant is great, but you still need device running it. Thread requires border router, but that is simpler device and only does networking.
Matter is the other part of Zigbee, the home automation profile. I get the impression it is bloated with multiple companies involved, but it is standard. Matter means that your phone can talk to Wifi device with your choice of apps.
I'm currently blocked because Google and Amazon don't support "Generic Switches". Which means that if I switch over a light-bulb to being a smart one I can't use something like the Arre Smart Button to control them. Which seems like such a standard requirement that I do not understand why it's not supported.
If Ikea will let me set that up then I'll be delighted.
UPDATE: Ok, is this about the state of Matter implementation? I think I misunderstood that.
But I read that Thread supports IPv6 via mesh networking. It did always feel a bit awkward having Zigbee networking and IP networking competing over the same site. It would be very nice to issue commands from any peer to any other peer, using standard networking. Can anyone here confirm that Matter/Thread will be a bright, open, and happy new future?
A lot of people I know would scoff at “smart home” stuff. I used to. Having a programmable house is incredibly useful though. When all your lights and sensors are available for programming you can do stuff that’s cool not because it is particularly innovative but because it is incredibly easy to implement:
- my partner can control a “do not enter, call in progress” red light bulb;
- my outside lights trigger off PIR, door sensors, or Ring motion detection;
- I have a series of indoor lamps come on in succession if motion is detected outside at night;
- we programmed a push button to turn a light green on one tap and red on a double tap for a fun game of twenty questions;
- and my indoor Ring cameras shut down unless both my partner and I are out of the house.
All of these things were trivial to do given that everything is available on one Home Assistant instance!
e.g. if I add future Ikea lightbulbs or other equipment, will this mean managing them via a different system?
(By the by, I've been very happy with Ikea bulbs so far; while other people complain of LED bulbs with a short lifespan, [touches wood] I've not had a single failure with Ikea smart bulbs, with ~7 years and counting on one of mine.)
On top of that, the switch breaks compatibility with existing hardware (except for the Touchlink functionality). If you have a bunch of Zigbee devices, but at some point want to add some of the new ones, you need to start thinking about replacing all the perfectly working Zigbee devices or have a fragmented network.
If "closed" means open to anyone that has their product certified to adhere to the rules, then I'm ok with that.
Just like Apple HomeKit you can add devices that aren't certified. It shows a warning, but apart from that it functions like a normal device (for as far as I can tell).
I have been using https://github.com/t0bst4r/home-assistant-matter-hub to expose my home assistant devices to Google Home without having to expose my Home Assistant to the cloud.
Second, certification is what separates Z-Wave from Zigbee which in my (n=1) experience means less issues in terms of compatibility.
Of course, with that GitHub package I shared all of that goes through the window, but who cares? I can clone the code and modify it.
I mean, that PKI doesn't exclude non-approved manufacturers from producing Matter devices, you can always trust their PAA (their CA) in your border router if it's not a well-known manufacturer. And also, I am pretty sure that if this is the case the Matter border router should warn you of this and ignore the fact that the PAA is not in the local store of root CAs (as we did in the times when we had https without Let's Encrypt and didn't want to pay Comodo to sign our certs)
I ended up pairing mine with a 'ConBee II' and with a bit of Go code was able to receive sensor data with very little latency, and activate switches and lights very quickly.
What a shame they discontinue such a great product line. But I already decided this is the last home automation technology I'll invest in. ZigBee seems perfectly suited for this role, and no idea why we need yet another new standard. Although I also said that switching away from x10, if anyone still remembers that.
They are also pretty good at labeling the products in their website, you can search by “last chance to buy” (or local language equivalent) to see the list.
So it's a closed ecosystem that makes money for a cabal of corporations
Maybe I judge them poorly because they’re the cheapest devices I let myself buy? Idk. They look great though.
Bold move.
.. but all I can remember from growing up is the X-10 POWERHOUSE
I've found Matter totally confusing. Given a device that supports Matter (e.g., a smart plug) and a set of devices I want to control that from (e.g., an Amazon Echo and an iPad) it is not clear to me what else I need.
Apparently I need a "controller", which is not necessarily the thing that I as a user would think of the controller--as a user I think of the controller as the device I issue command from. A Matter controller is apparently a hub for connecting the thing I'm using to issue commands to the IOT device I want to control.
And maybe I need a "Thread border router"?
As far as the controller goes, apparently at some point Apple added the ability for iPads to be Matter controllers, so you could use a Matter device with just an iPad (if the Matter device used WiFi...if it used Thread then you would need a separate Matter controller and I'd guess one of those Thread border routers).
I was able to briefly use a Matter smart plug with my iPad without having a separate hub, but it stopped working not too long after. I deleted the plug from the iPad and did a factory reset on the plug and tried setting up again, but now when the iPad searches for the device during setup it doesn't even see it.
Apple still has instructions on their site for setting up devices for direct use from iPad, but several sites on the net report that they actually dropped that support from iPad.
So lets say I go get an actual Matter hub. Do I need a separate hubs for using my Matter devices from my Apple devices and using my Matter devices from my Amazon devices? How about if I need a Thread border router--will I need one for Apple and one for Amazon? What if I add Home Assistant later--am I going to need a third hub?
All I'm really trying to do for now is use this one TP-Link Tapo smart plug that supports Matter from Apple Shortcuts without having to use the Tapo app. The Tapo app does integrate with Shortcuts but you have to be logged in to your TP-Link account on the app for it to work. Every so often you have to re-login, breaking your shortcuts until you do.
What I'm currently considering is installing Home Assistant somewhere, probably in a VM on my Mac for now but latter on a dedicated RPi if the experiments in a VM show that it will work, and setting it up to be my Matter controller for the smart plug. Shortcuts (or Siri) won't be able to directly use Matter to control the plug with that setup, but there is a Home Assistant app for iOS/iPadOS that can do so and that supports Shortcuts.
It will basically be like I'm doing now with the Tapo app but instead with the Home Assistant app and no need to be logged in to TP-Link (or to even have internet access).
PS: I wouldn't need any of this if Apple would just get around to implementing for iPadOS the same 80% charge limit option that they have had on iOS for ages. I'm using the smart plug and Shortcuts as a kludge while waiting for that. I charge through the smart plug and have a Shortcut automation to turn off the smart plug when the iPad's battery level rises above 80%.
You still need the TP-Link app for some more advanced functions like power metering though.