That made the post? Everything in your comment is in the post, AI summaries aren't very popular.
> I designed the whole board as code, which I’d recommend to anyone who, like me, finds dragging traces around with a mouse maddening. KiCad—the free PCB tool—has a Python API, so the entire card is generated by a script.
My guess as well. I don't like it when humans silently pass off LLM writing as their own.
I also don't like it when humans silently pass off LLM work as their own.
Prompting is not the same as doing the work. There are ways to genuinely collaborate with LLMs, but if someone silently takes full credit for work generated by LLMs, my assumption is they probably vibe coded it.
Plus, I spend my free time expending effort to consume human generated content. I’m okay with slop someone pays me to deal with, but don’t expect people to read your hobby related post when you couldn’t be bothered to write it.
I can understand because I find MCAD drafting to be a chore and like that I can describe a script to generate geometry now for most things.
Even still, it's difficult for me to fully get it. There is so much art in ECAD layout. There are many dimensions to weigh and high levels of thought and care can result in a higher quality, lower cost product. Many nuances are not properly captured by simplistic automations or chatbots and won't be for some time. Things that accelerate schematic capture, layout capture, library management, and simulation are all useful tools. They're most effective when used with care and thoughtfulness.
> I still can't get over JLCPCB assembling ten of these for about $75.
I remember years and years ago I made some business cards out of 304 stainless with a laser etched design and bottle opener on the side (before that whole idea became mass marketed). It cost me over a hundred bucks for ten, wild that you can get whole pcb assembly done for less now days.
We just did this https://news.ycombinator.com/item?id=49478426 this is starting to become the risc v of fpga resumes. It's certainly work and making anything that exists and works even somewhat is commendable but it's getting played out
The temp sensor and transceiver PCB are cast into urethane and the coil gets installed into the hotplate. In theory lets you do all kinds of interesting stuff like monitoring when you can't get a wired probe into the vessel, or to drive a control loop that actually monitors the liquid and not the plate temperature.
One of the best and most complete Hackaday posts I’ve ever read.
Some stuff, it’s okay to let the robot do.
Finding and filling in a slick little BOM display component, for example: people don’t just come up with extra 30+ minutes to do that when they’re spending hours on a post.
is it possible to do this with a wearable? say jewelry? i've been fascinated with the whole digital to physical world dislocation and this inspires me to dust off an old idea of around the world "collecting" passport stamps but the only way to actually collect them is by a physical tap. similarly, i can see jewelry that lights up upon being tapped by a phone or together. fun
A few months ago some dude offered a very fancy business card: it looked really gorgeous and all tech. Don't remember all the details but it was shiny and had tiny components etc.
So I took it and was going to put me in my wallet and the dude interrupted me and say: "No, no, you can't have it, I've got only one, you need to scan the QR code".
33 comments
[ 2.1 ms ] story [ 41.7 ms ] thread> I designed the whole board as code, which I’d recommend to anyone who, like me, finds dragging traces around with a mouse maddening. KiCad—the free PCB tool—has a Python API, so the entire card is generated by a script.
I also don't like it when humans silently pass off LLM work as their own.
Prompting is not the same as doing the work. There are ways to genuinely collaborate with LLMs, but if someone silently takes full credit for work generated by LLMs, my assumption is they probably vibe coded it.
Even still, it's difficult for me to fully get it. There is so much art in ECAD layout. There are many dimensions to weigh and high levels of thought and care can result in a higher quality, lower cost product. Many nuances are not properly captured by simplistic automations or chatbots and won't be for some time. Things that accelerate schematic capture, layout capture, library management, and simulation are all useful tools. They're most effective when used with care and thoughtfulness.
I remember years and years ago I made some business cards out of 304 stainless with a laser etched design and bottle opener on the side (before that whole idea became mass marketed). It cost me over a hundred bucks for ten, wild that you can get whole pcb assembly done for less now days.
https://www.youtube.com/watch?v=nh1SIfipQs4
The temp sensor and transceiver PCB are cast into urethane and the coil gets installed into the hotplate. In theory lets you do all kinds of interesting stuff like monitoring when you can't get a wired probe into the vessel, or to drive a control loop that actually monitors the liquid and not the plate temperature.
One of the best and most complete Hackaday posts I’ve ever read.
Some stuff, it’s okay to let the robot do.
Finding and filling in a slick little BOM display component, for example: people don’t just come up with extra 30+ minutes to do that when they’re spending hours on a post.
This is the post from some days ago that I thought I was commenting on - sorry for the fuckup, please accept this replacement story - mea culpa.
I believe it's real, but there are no artifacts to corroborate. That's a poor article.
It is sad that the internet has devolved into this state.
This is the post from some days ago that I thought I was commenting on - sorry for the fuckup, please accept this replacement story - mea culpa.
Also, agreed.
The only shot I saw was "while I was writing them" why not show what it looks like while in use?
This is the post from some days ago that I thought I was commenting on - sorry for the fuckup, please accept this replacement story - mea culpa.
These days it's more important for a write-up to be real than to have snazzy wording. Especially to an audience interested in this kind of topic.
This is the post from some days ago that I thought I was commenting on - sorry for the fuckup, please accept this replacement story - mea culpa.
Yes, but there are limits on the minimum size. The smallest off the shelf tag I have seen is about 10mm diameter disk sticker.
There are 3x3mm NFC chips but their read range is 2mm..
So I took it and was going to put me in my wallet and the dude interrupted me and say: "No, no, you can't have it, I've got only one, you need to scan the QR code".
I found that incredibly cheap ; )
P.S: and also I don't scan random QR codes.
If you ever build that deck, Joe, call me?