A great video, and I noticed the actual linked article here suspiciously follows the exact same structure and examples that Feynman does in his explanation. It would have been nice to acknowledge the fact that the author was probably watching Feynman explain it while writing. But it seems to be a student fun journal, and has made a few hundred people think, so why get upset?
If the belt is rubber, the friction is high enough, even when the system is starting from zero. (Assuming pulleys shaped like the ones linked above, of course.)
Whether a frictionless pulley is useless or not depends largely upon whether you are using it to change the direction of the line, adding tension to it, or using it to perform work. Such a pulley is only useless for the latter, such as a belt turning a drum, but a frictionless block and tackle or tensioning pulley would be incredibly useful.
anyone know if this was an intentional part of wheel/rail design from the start... or they originally intended it to work how we naïvely imagine and by accident it worked this way and was subsequently refined ?
Does the rail have some flexibility to twist and meet the wheel cone at the right angle, and/or is it pitched to match the angle of the wheel surface? When I look at the tracks and this wheel shape, I see the wheel riding on a corner of the rail, which is obviously not the case.
I wondered, how would this work with an axle-less low-floor bogie? The answer I found here[1] is — it doesn't. “… there is only a single series of trams that have these bogies, later versions returned to the traditional type with axles. … The wear problem is because those bogies don't seem to track as well, they go from left to right in the track”. The implication is that there were people designing rail vehicles who didn't know how they stay on the track.
There are more trams with axle-less bogies now.[1] The goal is to lower the floor height, eliminate steps, and improve wheelchair accessibility. It gets complicated. Some systems use big driven wheels and small trailing wheels. Some have a geared axle between the wheels. Siemens has a system with motors on each wheel, with the wheels locked together electronically. AEG tried something like that, with less success. Speeds of the more elaborate systems are rather low, below 70km/h (44mph). That appears to be a limit of the axle-less design.
That is really good, and also a massive reminder of how meaningless and inconsequential my work is, compared to people doing serious electrical and mechanical engineering like that.
In a similar note I wondered what the patent on the railroad ties on the Caltrain bed were (#5104039) and found this: https://www.google.com/patents/US5104039?dq=5104039&hl=en&sa... which has an interesting discussion about how the tracks manage to stay underneath the trains.
I've been on and around many trains and yet I never quite understood the concept of the wheel flange and how track junctions worked until very recently, thanks to a kids show: chuggington.
30 comments
[ 3.4 ms ] story [ 72.9 ms ] threadI really enjoy playing train simulator games, but as far as I understand, none of them actually simulate the physics of cone wheels and flanges.
http://woodgears.ca/bandsaw/crowned_pulleys.html
...even in extreme situations such as this:
http://en.wikipedia.org/wiki/File:Transmissionsriemen.jpg
For low speed / low friction between belt and pulley, you'll just pull the belt off of the pulley if the pulley is convex.
And for high speed / high friction you'll end up with the above effect.
So I wonder: where does it transition?
So my question isn't as odd as it might first appear then.
https://youtu.be/K4JhruinbWc?t=110
and this: https://en.wikipedia.org/wiki/Richard_Trevithick#/media/File...
That was probably a terrible screeching thing to witness going around bends, just being held in line by the inner lip of the rail.
[1] http://modeleng.proboards.com/thread/4521/chilled-iron-tram-...
[1] http://onlinepubs.trb.org/onlinepubs/tcrp/tcrp_rpt_02.pdf
https://www.youtube.com/watch?v=OEo-hQbyy30
This was brilliant but I'm really struggling to find an index page with the rest of them, I can find some of them via google directly.
Anyone figure it out?
Available online:
http://www.woodweb.com/Resources/wood_eng_handbook/wood_hand...
http://www.fpl.fs.fed.us/products/publications/specific_pub....