Feel like replacing my piece of shit LG with this. It can only soak for a predetermined amount of time and if I try to pause it to soak longer it drains the water in 3 minutes. Plus, scrud!
My favorite modern "efficiency" feature has to be the machine refusing to unlock the door for me after it's been "too long". Okay, fine. Reset cycle, add some random item, whoops there went a bunch of water and detergent. Not my problem I guess. Say goodbye to those EnergyStar figures.
At this point with having to read the manual to open the damned door I'm seriously thinking about attaching a belt drive, motor, driver circuit and esp32 running an http with spin/stop commands.
For many reasons, I expect to see a lot of new products and solutions going against the main trends of locking down the user, planned obsolence, rent seeking from buyers, and limiting their choices.
Imagining a company shipping the home appliances equivalent to Frame.work laptops: open, reparable, hackable, and upgradable. I would happily connect them to my home wifi, program them the way I want, and have one hub that allows me to monitor health, upgrade firmware, control functionality.
I was glad to see this because I had the same exact question, but then I realized that given this machine seems to be designed for manually loading the water into it, a dedicated "rinse cycle" probably wouldn't help much because it's probably easier to just manually rinse the clothes after.
I love it. I used to work for a company targeting markets in the developing world. It's really easy to take for granted the supply chains that exist all around us. I always like to see the creative solutions people come up with when resources are constrained.
PS: As an example, note the sheet-metal construction. In an industrialized country we would laser-cut all these parts. If you wanted to make this in an area with less infrastructure you might use a template and carbide gas torch to cut out the large shapes, then a hand punch to make the screw holes. More labor intensive, but still doable.
In an "industrialized" country we encase the real drum in a glued tight unopenable plastic enclosure to prevent the drum seals from being service replaced when they fail so that what used to be a small low cost repair now results in a forced new machine purchase.
My thinking as well. If they're truly dedicated to making this available to communities everywhere, they should open the design and make it as simple as possible for everyone to build a washing machine at home. In many cases people would still buy them, which is fine.
I am interested in unit cost for mass production. It needs to be significantly cheaper than an old style top-loading washing machine to be affordable. The design of old style washing machine is mature and priced at around $100 for 8kg model. I suspect it can be stripped down further, remove water pump, remove program controlled inlet valve et al. to reduce the cost to below $50. Granted, washing machine like that needs electricity, but solar panel may be cheap enough.
One more thing, the water is not always easy to get in poor places. It is often much easier to carry laundry to a well, creak, or river than transport water to home. The path to the water sources may be a narrow trail often going up and down hills, so even with wheels on the machine, it is impractical to drag the machine to the water.
> to make this in an area with less infrastructure you might use a template and carbide gas torch to cut
Metal work seems very expensive in some places. In a 2025 paper [1], a cooking pot looks like several aluminium rings welded together, about 50 cm tall and 70 cm in diameter, is 416 USD in Ghana, which is one of the destinations of this hand-crank washing machine.
This is very cool. Great that it’s built out of metal for longevity and repairability. Wonder if they could make the radius of the rotation smaller since that seems like the most likely ergonomic improvement I could see from the demo.
> We went back to the drawing board and really listened to the people we were designing for, for the context in which they lived. That research changed everything,”
I understand they had a very good idea to begin with, and more importantly their heart in the right place
And then further made it better with more input.
Reading the comments here the better solution for us is probably not to go back to "dumb" washing machines, but to regain control of how these machines are designed, for who and for what.
I'm thinking about Linux, which can be stripped down as small and nimble as needed to run a single board micro controller, or be large as needed to have everything to run an enterprise service. Being able to do the same with a washing machine would absolutely change their usefulness and place in our society.
I don't know how it could start, perhaps with an IKEA washing machine that actually needs assembly, for users to then tweak the parts, start comminities so we get at least in a KALLAX situation ?
I really like the practicality and simplicity of this.
Designing stuff for real humans to use, is really difficult, and really humbling.
In my experience, defense contractors really have to take the user context into account. It can be life or death. I used to work for one, and seeing the stuff come back from the field, was a lesson in humility.
The metal design in the article is still more flexible and durable. I also assumed the Japanese version would be targeted at disaster situations and/or remote mountain areas and be more repairable, but the cost saving part seems to be a major selling point.
That video is three years old, although the item in question might be older of course. I remember reading about the Washing Machine Project a decade ago or so.
There are lots of little hand-crank washing machines on Alibaba and Amazon. Most are plastic and rather fragile looking. Many seem to use the mechanism of salad spinners. The Sears WonderWash seems to be popular.
Sadly arm strength and endurance is way worse than legs, this should obviously work with pedals like a bicycle. I would even be ready to buy one to replace my daily commute when working from home.
>It works like this: after loading the clothes, detergent and water, and letting it sit for 10-15 minutes, users can close the lid and turn the handle for two minutes, repeating this twice more after ten minutes of letting the clothes sit in between spins. And voila — the machine can then be drained using the tap at the front.
I lived off-grid and did all of our laundry, a family of four (including a baby in cloth diapers), by hand, even in the winter (below -20F).
You know what works as well? A wash tub and a stick. Or a bucket and plunger. Or a posser if you're really fancy. I used a 30 gallon garbage can and a hand-carved posser. In mild or hot climates you can just stomp on it.
Same principle: Draw water, add cleanser, agitate for a couple of minutes, let it soak, return at some time in the future, agitate again. Remove laundry and let drip dry while you draw fresh water (mangles and spinners speed this up and are more effective, but not necessary). Squeeze wet laundry at lowest point where water has gathered. Repeat entire process with clean water, then lay it out in the sun prioritizing any sides with stains.
The secret sauce of clean laundry isn't how you agitate the laundry. It's just time and chemistry.
Water access, cleansing agents, and patience are fundamentally more important than providing "revolutionary" contraptions. It's the same difference between teaching people about no-knead bread and giving them hand-cranked stand-mixers. One solves the need for intensive manual labor and the other doesn't, but introduces a new point of failure.
And even importing enzyme-containing detergent is unnecessary. Plant ash (a source of alkali) and aged urine (a source of ammonia) are all you need to create what's known as bucking lye which cleans just as effectively and uses byproducts that they themselves produce by default. Residual stains are removed via UV from sun drying.
What's old is new again. It's surprising to see how surprised people get about this sort of thing - as if we skipped straight from hand-washing to computerized washing machines. One generation of living with technology and we forget how to live without it.
Maybe off-topic, but what is going on with this website?
"Step forward the ‘fully biodegradable’ shoe that leaves no footprint" - Hilariously awful idea. Which sane person wants shoes which are designed to literally disintegrate?
"The smartphone for children that blocks porn" - AI being used to surveil children phones for nudity. (???)
"Solar project reimagines railway network as clean energy lifelines " Literally Solar roadways again. Which is a idea worthy of so much ridicule.
When I lived in an apartment with no washer I got sick of using the laundrymat because it was expensive and kind of nasty. So I set up my own washing setup after some research.
I got something called a "breathing washer" which looks kind of like a toilet plunger and a big tote which I put in the bathtub for use. These breathing washers work really well and in my opinion get your clothes much cleaner than agitating and spinning.
Then I got something called a "spin dryer" that is basically a small centrifuge that spins a lot faster than a regular washing machine and leaves fabrics like light polyester nearly dry coming out.
Finally I got an inflatable plugin dryer.
This setup was more work than a regular washing machine but maybe not more work than bundling up clothes and taking to the laundrymat and sitting there for an hour or two. One thing I really liked about it was short time to process. I could have washed and dried clothes much faster than a conventional washer/dryer setup.
I've been in a house for a long time now and admittedly having a washer and dryer is much nicer and less work, but that setup was acceptable and much better than laundromats for whatever it's worth if someone is in a similar situation.
41 comments
[ 7.0 ms ] story [ 45.5 ms ] threadI think within no time it will be modded with motors, maybe salvaged from broken electrical appliances and it will come full circle.
For many reasons, I expect to see a lot of new products and solutions going against the main trends of locking down the user, planned obsolence, rent seeking from buyers, and limiting their choices.
Imagining a company shipping the home appliances equivalent to Frame.work laptops: open, reparable, hackable, and upgradable. I would happily connect them to my home wifi, program them the way I want, and have one hub that allows me to monitor health, upgrade firmware, control functionality.
PS: As an example, note the sheet-metal construction. In an industrialized country we would laser-cut all these parts. If you wanted to make this in an area with less infrastructure you might use a template and carbide gas torch to cut out the large shapes, then a hand punch to make the screw holes. More labor intensive, but still doable.
https://www.thewashingmachineproject.org/
That alone will be revolutionary.
One more thing, the water is not always easy to get in poor places. It is often much easier to carry laundry to a well, creak, or river than transport water to home. The path to the water sources may be a narrow trail often going up and down hills, so even with wheels on the machine, it is impractical to drag the machine to the water.
Metal work seems very expensive in some places. In a 2025 paper [1], a cooking pot looks like several aluminium rings welded together, about 50 cm tall and 70 cm in diameter, is 416 USD in Ghana, which is one of the destinations of this hand-crank washing machine.
1. https://www.sciencedirect.com/science/article/pii/S266711312...
I understand they had a very good idea to begin with, and more importantly their heart in the right place And then further made it better with more input.
Reading the comments here the better solution for us is probably not to go back to "dumb" washing machines, but to regain control of how these machines are designed, for who and for what.
I'm thinking about Linux, which can be stripped down as small and nimble as needed to run a single board micro controller, or be large as needed to have everything to run an enterprise service. Being able to do the same with a washing machine would absolutely change their usefulness and place in our society.
I don't know how it could start, perhaps with an IKEA washing machine that actually needs assembly, for users to then tweak the parts, start comminities so we get at least in a KALLAX situation ?
https://ikeahackers.net/2025/07/ikea-kallax-hacks-2.html
Designing stuff for real humans to use, is really difficult, and really humbling.
In my experience, defense contractors really have to take the user context into account. It can be life or death. I used to work for one, and seeing the stuff come back from the field, was a lesson in humility.
https://youtu.be/iMOkxrdP6kY?si=HWf_Sb-zwk5Vi8ES
(sold for about 10,000 yens https://item.rakuten.co.jp/thanko/000000003846/)
The metal design in the article is still more flexible and durable. I also assumed the Japanese version would be targeted at disaster situations and/or remote mountain areas and be more repairable, but the cost saving part seems to be a major selling point.
I lived off-grid and did all of our laundry, a family of four (including a baby in cloth diapers), by hand, even in the winter (below -20F).
You know what works as well? A wash tub and a stick. Or a bucket and plunger. Or a posser if you're really fancy. I used a 30 gallon garbage can and a hand-carved posser. In mild or hot climates you can just stomp on it.
Same principle: Draw water, add cleanser, agitate for a couple of minutes, let it soak, return at some time in the future, agitate again. Remove laundry and let drip dry while you draw fresh water (mangles and spinners speed this up and are more effective, but not necessary). Squeeze wet laundry at lowest point where water has gathered. Repeat entire process with clean water, then lay it out in the sun prioritizing any sides with stains.
The secret sauce of clean laundry isn't how you agitate the laundry. It's just time and chemistry.
Water access, cleansing agents, and patience are fundamentally more important than providing "revolutionary" contraptions. It's the same difference between teaching people about no-knead bread and giving them hand-cranked stand-mixers. One solves the need for intensive manual labor and the other doesn't, but introduces a new point of failure.
And even importing enzyme-containing detergent is unnecessary. Plant ash (a source of alkali) and aged urine (a source of ammonia) are all you need to create what's known as bucking lye which cleans just as effectively and uses byproducts that they themselves produce by default. Residual stains are removed via UV from sun drying.
There's absolutely no need to complicate this.
https://youtu.be/SgWh-5DsiQM?si=ILozBq9QPSEHd1W2
"Step forward the ‘fully biodegradable’ shoe that leaves no footprint" - Hilariously awful idea. Which sane person wants shoes which are designed to literally disintegrate?
"The smartphone for children that blocks porn" - AI being used to surveil children phones for nudity. (???)
"Solar project reimagines railway network as clean energy lifelines " Literally Solar roadways again. Which is a idea worthy of so much ridicule.
I got something called a "breathing washer" which looks kind of like a toilet plunger and a big tote which I put in the bathtub for use. These breathing washers work really well and in my opinion get your clothes much cleaner than agitating and spinning.
Then I got something called a "spin dryer" that is basically a small centrifuge that spins a lot faster than a regular washing machine and leaves fabrics like light polyester nearly dry coming out.
Finally I got an inflatable plugin dryer.
This setup was more work than a regular washing machine but maybe not more work than bundling up clothes and taking to the laundrymat and sitting there for an hour or two. One thing I really liked about it was short time to process. I could have washed and dried clothes much faster than a conventional washer/dryer setup.
I've been in a house for a long time now and admittedly having a washer and dryer is much nicer and less work, but that setup was acceptable and much better than laundromats for whatever it's worth if someone is in a similar situation.