This is what I copied from the en version of the modelscope page, right when they published it:
> Redisgned Multimodal MoE Model: 125B main model parameters, supplemented by an additional 51B N-gram embeddings,and 6B parameters activated per token.
> Efficient Training and Inference: Significantly reduces training and inference costs. At ~1/9th the training cost，Qwen3.8-Flash-Next achieves comparable capability against Qwen3.7-Plus, while being more capable in areas of coding and cowork.
There was another paragraph about a new attention, but I didn't copy that.
I've been running 27B a lot, I am honestly shocked at how well it performs. It's mind blowing how well the small qwen models (and particular, the 3.8 model) runs locally. It can create some really impressive toy coding projects. I haven't really done too much integrating into my actual workflows because I pay $100 for Claude Max, but I can see it being pretty helpful in that.
Depends on the rest of your hardware, and how the the n-gram weights work and if they can be streamed from SSD. If they can and you have 64GB system ram then you should actually be able to run it.
They are great base models for fine tuning on both text and visual tasks. Many OCR and object grounding models are based on small Qwen models, though they often replace visual encoder with a bigger one.
Qwen3 5-4B is the biggest model I can find tune in my laptop. And when I upgraded the model from Qwen3-4B to Qwen3.5-4B, both vanilla and fine tuned performances jumped significantly on a classification task.
Those models are great when you have very little data or very low diversity of examples, where it's not possible to train a neural net from scratch as it will just memorize the data. The best you can do is fine tune a generalist model for small number of steps until it starts over-fitting.
I actually do this with my MBP - it's a LLM server when I'm working - and then when I'm not it's just a really great machine for video editing and other media work.
How do you folks code at 40-50 tps? With an extremely lightweight harness (pi) and just 8k system and tools context, and ~40tps on qwen 3.8 27B 4-bit on low thinking mode, it still takes me nearly 30-45 mins for a basic coding session...
Does it work? yeah... But I'd pick a subscription anyday...
As someone who uses Opus daily for professional work and Qwen3.8-27B for all my private stuff, yes, Opus sub is faster for me, but I'm only rocking an R9700. If you're lucky enough to have sold a kidney on the blackmarket and purchased a 5090 and you're running ninfer, then actually... I think you'd be seeing fairly comparable performance!
There is a finite amount of time left for these companies to become next Facebook/Google, hoarding our interaction and privacy will be a point of contention pretty soon. At that moment, Qwen will be the knight in shining armor.
I enjoy the Qwen models a lot, but building things on top of them with OpenRouter has been painful.
OpenRouter does a lot of great work and I really enjoy being able to use different models so easily. I like when a provider is phasing out an older model that still works for my needs and the price is much lower. It seems like such a good win-win.
However, the problem is that many Qwen models have almost no capacity or is so flaky you literally have to just litter your code with a blacklist/whitelist of providers. OpenRouter has some attempts to solve this, but they don't work. In fact, OpenRouter has a lot of really cool stuff that is documented, but if you read the code it's not yet implemented or isn't actually there yet, which is a shame.
I tried to get in contact with them at OpenRouter about this and I was interested in working with them in the past, but it's difficult to get in touch with the right people and they are growing very fast. I expect being acquired by Stripe will accelerate those problems in some ways. I have no doubt they will resolve all of these issues eventually and scaling that much that quickly is really hard, so kudos to them, but the road has been pretty lame and taken some wind out of my sails.
The best solution to this for me is to self host litellm or a different router and use model aliases. For example I have a model called "coding" and when a new good model comes out I just switch the backend without needing to change the alias or the key in my projects (opencode, etc).
I have a few of them even a smart router called "agents" which will use local models but if it thinks the request might require higher reasoning it's routing to a different model
genuine question — how has fireworks or baseten or $reputable_inference_provider worked for your use cases? most production workload probably works fine with one of these and another set as fallback, at least so i think
Time to dust off my 128GB strix halo (literally—it’s been dusty, and it’s running a bit warm these days).
Any idea where this model sits according toquality benchmarks? Pre-bubble MSRP on this hardware was $1400, and it draws 200-ish watts, putting it down into consumer territory.
I’m wondering if it can replace claude for llm-friendly coding tasks.
So back in the Qwen 3.5 release, the 122B-A10B model scored slightly better than the 27B model. I'd expect this new 125B-A6B to perform similarly to the recently released 27B. Qwen3.8 27B is supposed to rival Sonnet/Opus 4.6.
Thanks. My current stack ranking of anthropic models is:
4.6 ~= 4.8
4.7 much worse.
Fable and newer consistently tells me to pound sand, so I’m not sure what I’m paying $200/month for. 4.8 sometimes does too, but it’s at least usable most of the time.
So, I’d expect this to mostly replace Claude for my workflows. The main tradeoff for me should mostly be token throughput vs. no longer really trusting anthropic.
Qwen3.8/Qwen3.6 has a weird self doubt/thinking too much problem. You can prompt it away. I would say it "approximates" Opus 4.X class models well enough especially for coding/linux problems.
The only reason I stopped using it as much is I was getting 25-35tok/s on Intel B70 (non-quant) which made some responses slow. For a long running/autonomous task, it would probably be sufficient.
- check your temp settings vs. Qwen's recommendations, they specify what it should be in the model card for thinking on, and that reduces some "over" think.
- the model appears to be intentionally designed to do a lot more test-time compute, if you anthropomorphize the tokens, it looks like overthinking and anxiety, but it is just spending compute to get to the end result, so it may not actually help it to prompt down the token spend (depending on the problem)
There is the rule of thumb that if you take the geometric mean of the total and active parameters of an MoE model you get the equivalent size of an equally capable dense model.
If you follow that formula, you would a 125b-a6b model to match a 27b model (sqrt(125*6)). That does not feel like a coincidence
That's a great question. I learned it on HN. Some searching around suggests it originated as an empirical observation in the local LLM space around 2023-2024
It's obviously just a rough approximation. Actual scaling laws suggested in published papers are a lot more complex, and even then you run into issues (architecture changes, effects like better training, putting intelligence on a one-dimensional axis is stupid in the first place, etc). But as an approximation it holds up pretty well for normal-ish ratios between active and total parameters
It will be interesting to see the intersection of this with inference engines like FreeToken which improve distribution of work for MoE models across CPU/RAM and GPU/VRAM.
If all it takes for a competitive model to run locally at good speeds is a used 3090 and some DDR4, then we might be in for the year of local AI.
> It is still slow, a lot slower than what you are used to with claude and co.
That really depends on the model, I run a few models locally. All at speeds comparable to or faster than Opus.
In general we haven't reached the ceiling for what performance we can get out of consumer hardware. As evidence by FreeToken which hasn't even added MTP/speculative drafting support yet, which will add another boost.
> Then when it runs for 30 minutes for something claude needs 5, your device will get hot.
I doubt the timing differential here, but even still I run my 3090 pretty heavily with inference workloads and it stays cooler than when I use it for gaming.
> And even a used 3090 is apparently now between 1-2k.
Yeah I guess the price went up significantly in the last couple months, used to be hovering around 1k. 3090 isn't the only option though.
Qwen 3.8 27B is so far the closest I have run, though it suffers on speed compared to Gemma4 26B MoE model which I still use. Neither are going to match Opus or Sol though, but they can be as fast or faster depending on what you are using them for.
I don't use a harness, all the mainstream ones I have tried have tanked my productivity. I know that's not a common sentiment, but it's been my experience. None seem built for the way I work. I program mostly in my head first away from keyboard, then go type it out (faster than it would take to describe the solution to an LLM). Also a perfectionist who likes to learn, and tends to work on out of distribution problems. All I need is a simple chat interface for light research, quick small scoped prototypes, and generating simple scripts.
Not saying a harness is out of the question for me, just all I have seen and tested so far are not for me. Maybe if someone builds a more deterministic harness that doesn't rely on plain English skill files that bloat context and only sometimes do what you want.
> That really depends on the model, I run a few models locally. All at speeds comparable to or faster than Opus.
Yes, a lot of Qwen3.8 27B setups are actually quite snappy, as long as they fit 100% in VRAM. In my testing, I wouldn't go below 32GB of VRAM, though—you really want a 6-bit quant and 8-bit K/V quants minimum. I've seen too much weirdness out of 4-bit quants since Qwen3.8 shipped. I think it may be damaged more than 3.6 at similar levels of quantization?
If hyperscalers hadn't bought up almost all the fast RAM production for the next several years, 32GB of VRAM would be tolerably cheap—a lot by "home PC" standards, but not terrible by "professional tools" standards. Sadly, the RAM market is amazingly ugly right now.
> I doubt the timing differential here, but even still I run my 3090 pretty heavily with inference workloads and it stays cooler than when I use it for gaming.
Yeah, running inference on a laptop is likely to run quite hot. But in an ATX case with decent cooling, it's generally a lower load than gaming. One handy tip: Many Nvidia GPUs (and some from other manufacturers) support power limits. For example, limit a 5090 to 400W instead of 600W, and it will run much cooler. You might lose 11% off your tokens/sec (depending on the exact card).
I have 2 4090 and last time i played around with it, the context window killed it for me.
The normal LLMStudio stuff works great, but then i tried out anything with subagent things or parallel stuff and it trashed my cache and got super sluggish/slowish.
Have you tried FreeToken yourself? I was hoping to find some benchmarks on their github but took a quick pass at their research paper and it seems they're showing ~2x performance on qwen 3.6 35b when compared to llama.cpp - but llama.cpp is so sprawling and has so many options I find that a difficult comparison.
I haven't yet, though plan to when this model is released. The models that I've been daily driving (Gemma 4 26B, Qwen 3.8 27B) have fit nicely on my 3090. I think FreeToken only offers a perf increase for MoE models that you can't feasibly fit in VRAM.
Yeah I'm sometimes unsure how to get best perf out of llama.cpp, and honestly thought it already did what the FreeToken paper discusses, but from everything I've been able to find since llama.cpp has no dynamic expert cache for GPU. An RFC discusses adding such capability and there's impressive results some are claiming from a fork, but I had to stop reading the thread, reading all the LLM generated comments and summaries from people was making me dizzy.
Only VRAM? Unlikely unless you can also load the whole model into regular RAM. The previous 3.5 release was 250gb at BF16, so FP8 would likely be around 125gb. Your best best is FP4/Q4.
Finally, a reason to own a 128GB Strix Halo or GB10 device. Or a reason to consider the new Mac Studio.
I have a Strix Halo and dual 32GB GPUs in my desktop, and the latter is pretty much always better for running local models because it's quite a bit faster due to higher memory bandwidth. There simply haven't been any models that are better than Qwen 27B or Gemma 31B, which run comfortably in 64GB with big context.
And, MoE should make it run at a close to usable speed.
I can do traditional server stuff on any old computer with a big hard disk and a decent amount of RAM. That's not worth $3500-$4000. When RAMpocalypse is over and we can buy a Strix Halo for under $2000 again, the math starts mathing. It becomes a pretty great desktop computer that also happens to run AI pretty well at a pretty good price.
The Strix Halo and DGX Spark are pretty danged slow, relatively speaking. I don't ecall exact numbers, but with MoE models in this size ballpark (Laguna S 2.1), I seem to recall I was seeing about 20-25 t/s with a big context, which is close to usable. Qwen 3.8 27B crawls on this hardware, though, at 10-16 t/s, definitely not comfortable for interactive use. (Though this makes it seem like you can cook pretty good with a 4-bit ROCmFP4 quantization: https://github.com/julianmb/q38rocm the model does get notably dumber below six bits.)
A model similar in size to Laguna S 2.1, but with only 6B active parameters, should be a notable amount faster, so I would imagine 25-30 t/s would be a reasonable guess for where Qwen 3.8 Flash Next will land.
DFlash2 might improve all these numbers. It wasn't available last I was testing new models on the Strix Halo; I've only used MTP (which doesn't generally improve MoE models, but I believe DFlash2 can).
Given software improvements, I'm hopeful an MoE in this size range will be the sweet spot that pushes past 40 t/s and is also smart enough for real work. Qwen 3.8 27B is finally a self-hostable model that's smart enough, but it thinks so hard it still isn't really useful for agentic interactive use.
No. In Linux, you can ignore the BIOS (well, set it to 512MB) and set GTT to allow almost the entirety of memory for GPU. If you don't run a desktop GUI (and why would you), you don't need memory for much of anything else. Just a few GB for the OS and llama.cpp.
Arguing with people on here that you should buy GFX cards instead of overpriced Macs for inference is a lost cause. Either Apple astroturfs this forum hard enough to convince people Macs are good for local llm, or people are REALLY stupid and don't understand how local inference works and think that the dogshit slow 40-50 tok/sec is standard.
I have had an impossible time getting 120B or better models running on Strix Halo (especially under Windows) with any large context windows. And 30-40 tokens/second is fine, but not the fastest.
For the most part lately I have been sticking with Qwen 3.8 27b and that thing will easily suck up 64gb of ram. Add in docker with some additional programs running and it's really easy to eat up 128gb of ram.
I found a couple of different 4-bit quantizations of Laguna S 2.1 that run pretty well with pretty big context (also quantized, to 8 bits, I think). Unfortunately, Laguna isn't better than Qwen 3.8 27B, which I'm able to run at roughly the same speed on my desktop machine, so I don't use Laguna or the Strix Halo very much, lately. (It's also too hot for me to be running heaters for inference. It's been ~110F most days for the past few weeks.)
A fork of llama.cpp focused on Strix Halo optimization, achieving sustained 55 t/s (or 65 t/s in short bursts) with Qwen3.8 27B. Hopefully it all gets upstreamed, but I'm happy to run a fork for now.
In any case, there is so much effort being put into local models and optimization now that means basically all AI-capable hardware is becoming more valuable over time. A year ago the Strix Halo seemed to be a product in search of a market, but now I'm envious of anyone who bought at a more reasonable price.
Not full precision. I've only benchmarked 27B across Q3-6 quants using lm-eval. I lack the hardware to bench 27B at BF16 but I might be able to do Q8_0. I haven't gotten around to doing 35B. I really should upload my collection of results to Github or somewhere.
Here's a summary of what I have for 27B. I used unsloth's UD-Q{3-6}_K_XL quants across 11 evals. The values are pretty linear between Q3 and Q6.
So, I know https://cactuscompute.com/needle is designed only to enable tool calling on tiny devices. But, I wonder if anyone has used it as a CPU-side mediator between a tool and a GPU-side local LLM making semi-natural-language tool requests...
This is great. I have a weird system layer (192gb system ram, 8gb vram). the mixture of experts models have been nice when i can run the dense reasoning layers on the gpu (which somehow fit?!) and then the expert on the cpu.
its worked out to to 40 tokens/seconds on their 80b-a3b model. we'll see how much of a hit this is.
oooh, I like a6b; that will be nice. 3.5 A10B qwen works really well in deer-flow when you want to seriously vibe code or research and you're just not going to baby sit.
A bit of context: 3.5 was the last version where they released their entire suite of models 2b-400b. Then 3.6 got a 27b dense and a 35b moe. Then 3.7 was API only, and 3.8 got only the 27b dense. The devs confirmed on twitter that 35b moe would not come. So that's what I meant by 3.8 is not getting a moe.
3.8 next is not really a 3.8 (but I guess they had to disambiguate from the previous next). It's a preview of qwen4 architecture (and it is an moe + ngram), released early as a preview, and to help the community sort out inference before qwen4 releases.
149 comments
[ 1.5 ms ] story [ 8.6 ms ] threadIt also said 51B of n-grams and new attention (IIRC it said "Qwen Sparse Attention").
> Redisgned Multimodal MoE Model: 125B main model parameters, supplemented by an additional 51B N-gram embeddings,and 6B parameters activated per token.
> Efficient Training and Inference: Significantly reduces training and inference costs. At ~1/9th the training cost，Qwen3.8-Flash-Next achieves comparable capability against Qwen3.7-Plus, while being more capable in areas of coding and cowork.
There was another paragraph about a new attention, but I didn't copy that.
They are just giving sleepless nights to the western tech giants.
what a joke this resolver has become
This one is basically aimed at macs, Strix halo and DGX Spark.
That gives me hope that "full family" means it will include smaller models like 4B.
Qwen3 5-4B is the biggest model I can find tune in my laptop. And when I upgraded the model from Qwen3-4B to Qwen3.5-4B, both vanilla and fine tuned performances jumped significantly on a classification task.
Those models are great when you have very little data or very low diversity of examples, where it's not possible to train a neural net from scratch as it will just memorize the data. The best you can do is fine tune a generalist model for small number of steps until it starts over-fitting.
A 4-bit MLX quant with 128k window should fit perfectly, in the 50-70 tok/s range.
I’m personally considering retiring my MBP for a Studio + 15" Air whenever this MBP ages out.
I’m doing that. Mac Mini M4 Pro with 48G RAM as a headless llama.cpp server.
I much prefer using " thin clients " as the interface to the big VMs running in my homelab
Does it work? yeah... But I'd pick a subscription anyday...
OpenRouter does a lot of great work and I really enjoy being able to use different models so easily. I like when a provider is phasing out an older model that still works for my needs and the price is much lower. It seems like such a good win-win.
However, the problem is that many Qwen models have almost no capacity or is so flaky you literally have to just litter your code with a blacklist/whitelist of providers. OpenRouter has some attempts to solve this, but they don't work. In fact, OpenRouter has a lot of really cool stuff that is documented, but if you read the code it's not yet implemented or isn't actually there yet, which is a shame.
I tried to get in contact with them at OpenRouter about this and I was interested in working with them in the past, but it's difficult to get in touch with the right people and they are growing very fast. I expect being acquired by Stripe will accelerate those problems in some ways. I have no doubt they will resolve all of these issues eventually and scaling that much that quickly is really hard, so kudos to them, but the road has been pretty lame and taken some wind out of my sails.
I have a few of them even a smart router called "agents" which will use local models but if it thinks the request might require higher reasoning it's routing to a different model
Token generation is slow (and prefill is) but you will likely find it solves actual problems faster than Qwen 3.6 35B-A3B.
To change the reasoning strength you just put text in the system prompt.
From memory it is:
Any idea where this model sits according toquality benchmarks? Pre-bubble MSRP on this hardware was $1400, and it draws 200-ish watts, putting it down into consumer territory.
I’m wondering if it can replace claude for llm-friendly coding tasks.
4.6 ~= 4.8
4.7 much worse.
Fable and newer consistently tells me to pound sand, so I’m not sure what I’m paying $200/month for. 4.8 sometimes does too, but it’s at least usable most of the time.
So, I’d expect this to mostly replace Claude for my workflows. The main tradeoff for me should mostly be token throughput vs. no longer really trusting anthropic.
The only reason I stopped using it as much is I was getting 25-35tok/s on Intel B70 (non-quant) which made some responses slow. For a long running/autonomous task, it would probably be sufficient.
- check your temp settings vs. Qwen's recommendations, they specify what it should be in the model card for thinking on, and that reduces some "over" think. - the model appears to be intentionally designed to do a lot more test-time compute, if you anthropomorphize the tokens, it looks like overthinking and anxiety, but it is just spending compute to get to the end result, so it may not actually help it to prompt down the token spend (depending on the problem)
If you follow that formula, you would a 125b-a6b model to match a 27b model (sqrt(125*6)). That does not feel like a coincidence
It's obviously just a rough approximation. Actual scaling laws suggested in published papers are a lot more complex, and even then you run into issues (architecture changes, effects like better training, putting intelligence on a one-dimensional axis is stupid in the first place, etc). But as an approximation it holds up pretty well for normal-ish ratios between active and total parameters
If all it takes for a competitive model to run locally at good speeds is a used 3090 and some DDR4, then we might be in for the year of local AI.
https://github.com/FlashML-org/FreeToken
It is still slow, a lot slower than what you are used to with claude and co.
And as soon as you increase context size, your memory requirements jump.
Then when it runs for 30 minutes for something claude needs 5, your device will get hot.
And even a used 3090 is apparently now between 1-2k.
That really depends on the model, I run a few models locally. All at speeds comparable to or faster than Opus.
In general we haven't reached the ceiling for what performance we can get out of consumer hardware. As evidence by FreeToken which hasn't even added MTP/speculative drafting support yet, which will add another boost.
> Then when it runs for 30 minutes for something claude needs 5, your device will get hot.
I doubt the timing differential here, but even still I run my 3090 pretty heavily with inference workloads and it stays cooler than when I use it for gaming.
> And even a used 3090 is apparently now between 1-2k.
Yeah I guess the price went up significantly in the last couple months, used to be hovering around 1k. 3090 isn't the only option though.
I don't use a harness, all the mainstream ones I have tried have tanked my productivity. I know that's not a common sentiment, but it's been my experience. None seem built for the way I work. I program mostly in my head first away from keyboard, then go type it out (faster than it would take to describe the solution to an LLM). Also a perfectionist who likes to learn, and tends to work on out of distribution problems. All I need is a simple chat interface for light research, quick small scoped prototypes, and generating simple scripts.
Not saying a harness is out of the question for me, just all I have seen and tested so far are not for me. Maybe if someone builds a more deterministic harness that doesn't rely on plain English skill files that bloat context and only sometimes do what you want.
Yes, a lot of Qwen3.8 27B setups are actually quite snappy, as long as they fit 100% in VRAM. In my testing, I wouldn't go below 32GB of VRAM, though—you really want a 6-bit quant and 8-bit K/V quants minimum. I've seen too much weirdness out of 4-bit quants since Qwen3.8 shipped. I think it may be damaged more than 3.6 at similar levels of quantization?
If hyperscalers hadn't bought up almost all the fast RAM production for the next several years, 32GB of VRAM would be tolerably cheap—a lot by "home PC" standards, but not terrible by "professional tools" standards. Sadly, the RAM market is amazingly ugly right now.
> I doubt the timing differential here, but even still I run my 3090 pretty heavily with inference workloads and it stays cooler than when I use it for gaming.
Yeah, running inference on a laptop is likely to run quite hot. But in an ATX case with decent cooling, it's generally a lower load than gaming. One handy tip: Many Nvidia GPUs (and some from other manufacturers) support power limits. For example, limit a 5090 to 400W instead of 600W, and it will run much cooler. You might lose 11% off your tokens/sec (depending on the exact card).
The normal LLMStudio stuff works great, but then i tried out anything with subagent things or parallel stuff and it trashed my cache and got super sluggish/slowish.
What do you run and how?
Yeah I'm sometimes unsure how to get best perf out of llama.cpp, and honestly thought it already did what the FreeToken paper discusses, but from everything I've been able to find since llama.cpp has no dynamic expert cache for GPU. An RFC discusses adding such capability and there's impressive results some are claiming from a fork, but I had to stop reading the thread, reading all the LLM generated comments and summaries from people was making me dizzy.
RFC here https://github.com/ggml-org/llama.cpp/discussions/24528 which also links to some experimental implementations throughout the thread.
I have a Strix Halo and dual 32GB GPUs in my desktop, and the latter is pretty much always better for running local models because it's quite a bit faster due to higher memory bandwidth. There simply haven't been any models that are better than Qwen 27B or Gemma 31B, which run comfortably in 64GB with big context.
And, MoE should make it run at a close to usable speed.
also can you use it for fine tuning?
A model similar in size to Laguna S 2.1, but with only 6B active parameters, should be a notable amount faster, so I would imagine 25-30 t/s would be a reasonable guess for where Qwen 3.8 Flash Next will land.
DFlash2 might improve all these numbers. It wasn't available last I was testing new models on the Strix Halo; I've only used MTP (which doesn't generally improve MoE models, but I believe DFlash2 can).
Given software improvements, I'm hopeful an MoE in this size range will be the sweet spot that pushes past 40 t/s and is also smart enough for real work. Qwen 3.8 27B is finally a self-hostable model that's smart enough, but it thinks so hard it still isn't really useful for agentic interactive use.
I am using the PrismaAQUA
standard 9.7 t/s
+ Dflash2 30 t/s
+ torch-compile 37 t/s
c8 = 177 t/s
These are roughly the settings I use: https://github.com/kyuz0/amd-strix-halo-toolboxes#kernel-par...
The 3080ti is 912.4 GB/s
It costs more than the strix to just buy regular ddr5 ram sticks today.
For the most part lately I have been sticking with Qwen 3.8 27b and that thing will easily suck up 64gb of ram. Add in docker with some additional programs running and it's really easy to eat up 128gb of ram.
A fork of llama.cpp focused on Strix Halo optimization, achieving sustained 55 t/s (or 65 t/s in short bursts) with Qwen3.8 27B. Hopefully it all gets upstreamed, but I'm happy to run a fork for now.
In any case, there is so much effort being put into local models and optimization now that means basically all AI-capable hardware is becoming more valuable over time. A year ago the Strix Halo seemed to be a product in search of a market, but now I'm envious of anyone who bought at a more reasonable price.
Laguna-S-2.1:UD-Q4_K_XL (no MTP) pp=186.4 t/s tg=27.8 t/s
Qwen3.6-35B:UD-Q4_K_XL (with MTP) pp=404.4 t/s tg=83.2 t/s
Qwen3.6-27B:UD-Q4_K_XL (recorded pre-MTP) pp=343 t/s tg=12.1 t/s
Laguna actually performed better than I remembered. I thought it was slower.
Here's a summary of what I have for 27B. I used unsloth's UD-Q{3-6}_K_XL quants across 11 evals. The values are pretty linear between Q3 and Q6.
its worked out to to 40 tokens/seconds on their 80b-a3b model. we'll see how much of a hit this is.
Guess Qwen 4 is the one to wait for.
3.8 next is not really a 3.8 (but I guess they had to disambiguate from the previous next). It's a preview of qwen4 architecture (and it is an moe + ngram), released early as a preview, and to help the community sort out inference before qwen4 releases.
For context 35B on my m4 runs at 10 tokens a second, 27B moe runs 50-60 tokens a second.